Build Diary 27/28-July-05
I have painted the rear skin and rollbar. The rear skin
has to be riveted in place before the angles (on seat brace X section) can be riveted
in place, otherwise you can get to the skin rivets. See plan DWG20 Note 5.
I am now pleased with the paint finish on the rollbar.
The angle is riveted in after the outer skin is fitted.
The yellow is JC5 seam sealer, the excess will wip off later.
I started riveting from the front.
Images & text copyright GAPilot & Go-7. This mail is not connected
to Vans Aircraft Inc. The contents of this site is the opinion of the author,
not Vans Aircarft, PFA, CAA or FAA. Please check all information is correct
before you act upon it.