Build Diary 05-October-05
This evening I started to roll the leading edge of the rudder. It's
not easy and I need some help, so I decided to play with my instrument panel
mock up instead.
Rolling the rudder leading edge. I used a small diameter water pipe to form the curve.
You can see the pipe I used in the back ground.
One side of the leading edge has a step. This has made the rolling difficult.
The instrument panel mock-up. I am cutting out the hole for the Dynon D100 I got last week.
Advanced supplied a cut-out template.
Images & text copyright GAPilot & Go-7. This mail is not connected
to Vans Aircraft Inc. The contents of this site is the opinion of the author,
not Vans Aircarft, PFA, CAA or FAA. Please check all information is correct
before you act upon it.