Heading www.gapilot.co.uk

Build Diary 14-September-05

Previous page - HomePage - BuildDiaryIndex - Next page.

This evening I drilled the elevator horns, fitted trim servo and control rod.




To drill the elevator horns it was easier to take the HS off the fuse.
The smaller hole is the pilot hole for the control rod. Drill the hore that is most aft. Then match drill to other horn. The hores will not align exactly, mine were almost exact.
The trim servo

Both horn's drilled.

Images & text copyright GAPilot & Go-7. This mail is not connected to Vans Aircraft Inc. The contents of this site is the opinion of the author, not Vans Aircarft, PFA, CAA or FAA. Please check all information is correct before you act upon it.