Heading www.gapilot.co.uk

Fitting a Superior IO-360 - Oil Cooler

I suggest you fit the oil cooler joint before fitting the engine. Pay attention to the angle of the fitting and the length of the hose to the oil cooler. I fould the 45 degree fitting in this position works. Think about servicing and mainternance, as the oil filer is close. It fit this I needed to remove the magneto. Face it you are going to have to check the magneto position before you start the engine for the first time.

Note protective cover on oil cooler line - its not to protect the oil line it's to protect other parts from the oil line.
Top oil cooler connection, check where the pipe goes past/through engine mount.

Copyright © 2008 G0-7 All rights reserved. All pictures are property of Go-7 (unless noted) please do not reproduce. For more information contact This site is NOT the official Vans Aircraft Inc site. The contents of this site are the opinion of the author not Vans, LAA, FAA or CAA. Please check all information is correct before you act upon it.