Build Diary 16-March-06
Trimmed sides of the of the cowls to match the top and bottom sections. Cut and
fitted lower half of hinge
I decided to trim the sides outside this evening as I had tidied the workshop up. Funny as I cutting
and thought there was a lot of dust flying around no wonder the workshop had been such a mess. No,
it had started snowing!
Fitting the piano hinge to the side of the cowl.
The hinge pin is going through the firewall rather than out the front of the cowl. I will be fitting the cowl
hinge pin from in the cockpit. It will be held in place to stop it coming out.
Here I am using some gaffa tape to pull the two halfs together before drilling the top half of the hinge.
Images & text copyright GAPilot & Go-7. This mail is not connected
to Vans Aircraft Inc. The contents of this site is the opinion of the author,
not Vans Aircarft, PFA, CAA or FAA. Please check all information is correct
before you act upon it.