Build Diary 19-March-06
Cutting the cowl created lots of dust in the workshop so I moved the RV outside
and gave the workshop a complete clean and tidy. Back in the workshop I started planning the baffle
fitting, by creating profile templates of the cowl.
Looks sunny. It's warm in the sun but very cool in the shade. Roll on summer!!!
I gave the fuse a good dust off.
Here I have created templates to show the profile of the top cowl. This will enable me to shape the
baffles - they are directly under the cowl and need to follow the profile with a 3/8" gap.
Images & text copyright GAPilot & Go-7. This mail is not connected
to Vans Aircraft Inc. The contents of this site is the opinion of the author,
not Vans Aircarft, PFA, CAA or FAA. Please check all information is correct
before you act upon it.