Heading www.gapilot.co.uk

Build Diary 29-July-06

Saturday at the hanger, fitted lower rudder cover - now with strobe lamp. Fitted the seal around the airbox inlet - to lower cowl. Also fitted lower cowl to baffle floor seal.

Fitting and checking final cowl alignment.
I had not fitted the hut plates for the inner cowl - I have now.......
Airbox, I needed to fit the seal to the cowl air inlet.
Cowl airbox inlet cowl seal fitted.

These are all the cowl seals I have cut ready to fit.

Images & text copyright GAPilot & Go-7. This mail is not connected to Vans Aircraft Inc. The contents of this site is the opinion of the author, not Vans Aircarft, PFA, CAA or FAA. Please check all information is correct before you act upon it.