Build Diary 16-January-06
Fitting the intercom/radio jacks. I decided to modify the air vent mount - extend it down to
take the headset connections. Plus on the PAX side music input and a power connector.
I used a hole punch for the cut-out for the air vent.The bent angle I am using is an additional
throttle and mixture bracket I purchased from Vans.
This is the position. I decide here as I want the headset wires kept to the side. Some builders have
the connections behind the seats, I prefer this position.
The connectors fitted, except the power connector as I need a hole cutter.......
Images & text copyright GAPilot & Go-7. This mail is not connected
to Vans Aircraft Inc. The contents of this site is the opinion of the author,
not Vans Aircarft, PFA, CAA or FAA. Please check all information is correct
before you act upon it.