Heading www.gapilot.co.uk

Build Diary 08-May-06

Continued working on the canopy perspex to frame. I am using West Systems Epoxy with microlite to fill the front.

Rubbing down after filling joint.

While I was mixing more resin for the canopy I bonded the top cowling inlet. The top cowl was refitted with the lower cowl as bonding this can effect the shape.
I used West Systems Resin with a small amount of microlite mixed in to thicken slightly. It was still thin enough to use a paint brush to apply.

Images & text copyright GAPilot & Go-7. This mail is not connected to Vans Aircraft Inc. The contents of this site is the opinion of the author, not Vans Aircarft, PFA, CAA or FAA. Please check all information is correct before you act upon it.