Heading www.gapilot.co.uk

Build Diary 15-May-06

Mixing jobs this evening. As I needed to spray some more primer I decided to do a few small jobs before I filled the workshop full of paint fumes. I layed up some more fiberglass and resin on the top cowl - by the inlets. Then I cut the second ignition lead holes in the baffles.

I also fitted a nutplate to the side of the fuse - inside - to attach the cowl hinge rod. Picture didn't come out, will take some more when I do the otherside!
Primered the interior panels for the baggage area and instrument panel.

Laying up more fiberglass on the cowl inlets.
Resin applied.
Baffle ignition lead grommet, arrived.

Images & text copyright GAPilot & Go-7. This mail is not connected to Vans Aircraft Inc. The contents of this site is the opinion of the author, not Vans Aircarft, PFA, CAA or FAA. Please check all information is correct before you act upon it.